During the process of producing mechanism carbon, crusher is the necessary equipment and indispensable machine during the charcoal machine equipment. Why do we say this? The main function of the crusher is to crushing the raw materials to the required size. During the production process, there are many raw materials that not meet the requirements. All of them need to be crushed by a crusher. Then we will talk about the working principle of crusher in the charcoal machine equipment.
The raw material size of charcoal machine is 5 to 10mm, which can be crushed by ordinary crusher. The operation principle of crusher is that the motor drives the main shaft and the turbine rotates at high speed to crush the raw materials, and the grounding material is reground by the gap between the blade and the grinding block to achieve the standard particle size.
When using the charcoal machine, we should firstly turn on the crusher and let the equipment idling for a few minutes to check if the sound is abnormal, and if the steering is correct. If there is no problem, then feeding raw material and began the crushing process. If you find the something wrong, please shut down the machine in time for maintenance. In the state of being turned on, it cannot be overhauled to avoid accidental injury.
When the charcoal machine is working, we should firstly check the raw materials, and do not have any foreign matter such as stones or metal, so as not to damage the machine, which made the machine can not be used normally. When the clogging occurs during use, it is strictly prohibited to reach into the silo. In the case of blockage, it should be turned off and then checked. After the smashing is completed, the equipment should be idling for a few minutes and then shut down, so that the remaining raw materials can be completely discharged, and then the crusher can be cleaned and routinely maintained.
Charcoal Machine
Carbonization Furnace
Briquette Machine
