What problems occur with Charcoal Rod Making Machineneed to be overhauled

What problems do the Charcoal Rod Making Machine need to be repaired? This question is a problem for many investors in the Charcoal Rod Making Machineneed industry. The bar machine is the most important equipment in the charcoal machine equipment, and it is the semi-finished mechanism carbon. If there is a problem with the equipment, it will not be able to produce, and if there is no way to produce it, it will not bring good income to the enterprise. What problems need to be repaired in the bar machine?

1. In the process of making a bar machine, how to carry out maintenance when there is smoke? In the case of this situation, it is necessary to check the optical machine to see if the raw material is too humid. If the humidity is too high, the humidity of the raw material should be 8% to 12%. If it is not the problem of humidity, Look at the end face of the recommender for wear and tear. If the end face is worn, smoke will also appear. If the propeller wears, it must be repaired.

2. In the process of making the bar machine, the rod produced does not form. If there is a problem of not forming, it is necessary to check the heating coil of the rod making machine. Check whether the heating coil can be heated. If it cannot be heated, it is necessary to exchange the heating coil and then work.

3. When the production is in the process of shutdown, how to carry out maintenance, this is to see if there is a problem with the circuit, if there is a problem with the circuit, timely maintenance.