0086-371-86617456
Home > News > Three stages of charcoal machine production line
BACK TO: news list

Three stages of charcoal machine production line

Author:Zhengyang MachineryTimes:2021-06-19
Share to:

1. Drying temperature stage: The fuel rod is sent to the carbonization furnace. From the beginning of work to when the temperature in the carbonization furnace rises to 160°, the moisture inside the fuel rod mainly depends on the amount of external heating and the heat generated by its own combustion. Evaporate water, so that it will not change the internal structure of the salary stick, nor will it affect the quality of the salary stick.

charcoal machine production line
charcoal machine production line

2. The initial stage of carbonization: After drying the fuel rod, the subsequent carbonization process needs to be carried out. In this process, the carbonization of the fuel rod mainly relies on its own combustion to generate heat, and the temperature in the furnace will rise to between 160-280 ℃. Such a high temperature will promote the decomposition reaction of the internal materials of the fuel rod, the change of the composition structure, and the preliminary carbonization stage of the charcoal.

3. Comprehensive carbonization stage: After the initial carbonization of the fuel rod, as the temperature becomes higher and higher, after the temperature is upgraded to 300-650℃, the material inside the fuel rod will be rapidly decomposed. Under different effects, the raw materials such as fuel rods will decompose rapidly. It will be retorted into charcoal, and charcoal will be produced and formed.

The principle of the charcoal machine is simple to say, and it is very easy to understand. That is, the branches, straws, straws, peanut shells, tree trunks, cotton stalks, tea seed husks, nut shells, weeds, leaves, etc., contain biomass fibers that can produce charcoal. Fill in the raw materials, pulverize into powder within 10mm by a pulverizer, dry it with a dryer so that the moisture content is within 12%, and then enter the rod making machine to form it at high temperature and high pressure (without any additives) Put it into the carbonization furnace for carbonization, and serve as a finished machine-made charcoal. It is also possible to directly use the continuous carbonization furnace to carbonize the material powder into carbon powder at high temperature. If you want to know more, please contact us.

charcoal machine
Charcoal Machine

Carbonization Furnace
Carbonization Furnace


Briquette Machine

Get In Touch

Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.

Your Name:*
Country:
Email:*
Tel/WhatsApp:*
Inquiry