Big Capacity Wood Charcoal Machine

Principle Of Operation of Biomass Briquette Forming Machine

The moisture content of raw materials after drying is at 12% or less, then materials are plastination into rods through the machine of high temperature and pressure (do not add any additives) ,finally the rods are carbonization into carbonization furnace. The produces can be use in twin-propose: raw materials can be formed into rods and then to process by carbonization, or first to carbonization and then be formed into rods.

Before molding the fuel rods ,raw materials stacking density of 60-350kg / m, after formed the density 1100-1400kg / m, we can see that the density of fuel rods after extrusion and molded was increased by several times more than dozen times.

Mechanism charcoal features: high density, high heat value, smokeless, odorless, non-polluting, non-explosive and flammable. Charcoal is the internationally recognized green product. Charcoal quality indicators are: carbon content> 85%, the heat is> 8 thousand calories, ash <5%, volatile matter <15%, moisture <4%, no impurities, odorless, smokeless ,combustion time> 3 hours.

Mechanism charcoal:also known as charcoal, firewood sticks, artificial carbon, renewable carbon, and smoke-free coal, scrap wood is processed into carbonaceous rod. The fuel rods of mechanism   use sawdust, wood chips, bamboo shavings, bark, branches, walnut shell, shell, cotton stalk, sesame stalks, corn stalks, sunflower stalks, large soybean straw, rice husk, bagasse, corn cob and other raw materials to grind ( 6mm in diameter, such as rice husk, sawdust) ,and then extrude materials by machinery to make into the rectangular, hexagonal or square hole forming fuel.