The grinder in the charcoal machine equipment

In the process of producing machine-made charcoal, the pulverizer is necessary equipment, and it is indispensable in the charcoal machine equipment. Why do you say that? The main function of the pulverizer is to pulverize the raw materials. If you do not meet the requirements, you need to use a crusher to crush. Let me tell you about the crusher in the charcoal machine.

The grinder in the charcoal machine equipment

Charcoal machine equipment production mechanism carbon pulverized raw materials are required to be 5 to 10 mm in size, which can be pulverized with an ordinary grinder. The principle of pulverization is that the motor drives the spindle and the turbine rotates at high speed to crush the raw materials, and The ground is ground again through the gap between the blade and the grinding block to reach the standard particle size.

When using the crusher, first turn on the crusher, let the equipment idle for a few minutes, and check whether the sound is abnormal and the steering is correct. If there is no problem, then perform the crushing. If a problem is found, it must be shut down and repaired. , When the machine is turned on, it cannot be overhauled to avoid accidental injury.

When smashing, check the raw materials. There should be no foreign objects such as stones and metals, so as to avoid damage to the machine and make the machine unable to use normally. When it is blocked during use, it is strictly forbidden to reach into the bin. In the case of blockage, the machine should be turned on and then turned off for inspection.

After the crushing is completed, the equipment should be idled for a few minutes before shutting down, so that the remaining raw materials can be completely discharged, and then cleaning and daily maintenance of the crusher.