Wood Hammer Crusher included material board, crushing chamber, feeding device, etc. There are runner rotor in the crushing chamber, and the runner rotor consists of the disc and activities hammer.Sieve and tooth plate mill are main working parts.
Wood Hammer Crusher is used for crushing smaller diameter raw materials,such as cotton stalks, wood chips, branch below 3cm. After the wood hammer crushing machine, the diameter of final products could be 3-5mm.
During the working processing of Wood Hammer Crushing Machine, processed materials falling into the crushing chamber from material slide, repeated shocks by high speed rotating hammer, friction and collision on the tooth plate, so it was gradually pieces to the granularity of the leaking through the sieve pore. Drip feed by conveying fan, transporting pipe to gather material cylinder, then through separation within the poly cylinder, powder by below discharge bag, air is being exhausted from above.
|Flail Cutter Quantity||16||24||32||60||80|
|Power of Fan（kw）||-||-||-||5.5||7.5|
|Flail Cutter Inlet Size（mm）||400*250||500*300||600*350||800*450||1000*550|
|Largest Input Material Size（mm）||30||40||50||80||100|
|Output Product Size（mm）||1-20||1-30||1-40||1-40||1-40|