0086-371-86617456
Home > News > How to make the charcoal machine produce good quality charcoal stably and smoothly
BACK TO: news list

How to make the charcoal machine produce good quality charcoal stably and smoothly

Author:Zhengyang MachineryTimes:2021-02-20
Share to:

The general principle of the welding technology of the thruster on the rod making machine is to restore the thruster to its original shape by welding and then grinding. In order to increase the use time of the thruster, wear-resistant welding rods are generally used for repair. But wear-resistant welding rod is a relatively rare type of welding rod, and its use is also very different from ordinary welding rods. Next, let's talk about the process of welding the propeller of the rod making machine:

Charcoal Machine
Charcoal Machine

1. Observe the recent wear and tear of the support, lock the parts that need to be welded, and make a mark.

2. Heating screw propeller. The general method is to make a small stove, insert the propeller, add charcoal to cover the first three spirals, and ignite until the propeller is red.

3. Use a wear-resistant electrode while it is hot to weld it all at once.

4. Insulation. Quickly insert the welded propeller into the dry lime powder and let it cool naturally for more than two hours.

5. Polishing. Grind the welded screw propeller with a grinder into the original shape that can produce rods.

charcoal machine
Charcoal Machine

Carbonization Furnace
Carbonization Furnace


Briquette Machine

Get In Touch

Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.

Your Name:*
Country:
Email:*
Tel/WhatsApp:*
Inquiry